{"product_id":"lmu2630mb-shgl12e-g1000","title":"LMU2630MB-SHGL12E-G1000","description":"\u003ch2\u003eCalAmp LMU-2630MB — LTE Cat-M1 12-Wire Sealed Fleet Telematics Tracker with IP67 Protection\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eCalAmp LMU-2630MB 12-Wire Sealed\u003c\/strong\u003e is a rugged, professional-grade vehicle telematics device engineered for advanced fleet management, commercial vehicle tracking, equipment monitoring, vehicle security, driver-behavior analysis, and enterprise IoT applications. Combining \u003cstrong\u003eLTE Cat-M1 cellular connectivity, high-sensitivity GNSS positioning, Bluetooth Low Energy 5.0, comprehensive digital and analog I\/O, serial and 1-Wire connectivity, onboard edge intelligence, motion sensing, and an IP67-rated enclosure\u003c\/strong\u003e, the sealed LMU-2630MB provides a highly capable telematics platform for demanding vehicle and equipment installations. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eUnlike the 20-pin LMU-2630MB configuration, this version uses a \u003cstrong\u003e12-wire captive harness\u003c\/strong\u003e and a sealed enclosure designed to provide substantially greater protection against environmental exposure. The IP67 construction, flexible electrical interfaces, integrated antennas, and optional internal backup battery make the device particularly appropriate for applications where a conventional in-cab telematics unit may not provide sufficient environmental protection. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003ch3\u003eAdvanced GNSS Vehicle \u0026amp; Asset Location\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB incorporates a \u003cstrong\u003e55-channel hybrid GPS\/GLONASS\/SBAS GNSS engine\u003c\/strong\u003e supporting the \u003cstrong\u003eWAAS, EGNOS and MSAS\u003c\/strong\u003e satellite-based augmentation systems. CalAmp specifies approximately \u003cstrong\u003e2.0-meter CEP open-sky positioning accuracy\u003c\/strong\u003e under its stated GPS\/SBAS static test conditions, providing precise location information for fleet and mobile-asset applications. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eGNSS tracking sensitivity is specified at \u003cstrong\u003e-167 dBm\u003c\/strong\u003e, while acquisition sensitivity is \u003cstrong\u003e-156 dBm for hot starts and -148 dBm for cold starts\u003c\/strong\u003e. Position updates are supported at rates of up to \u003cstrong\u003e4 Hz\u003c\/strong\u003e, and the device is capable of \u003cstrong\u003eAssisted GPS (AGPS)\u003c\/strong\u003e location assistance. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThese capabilities allow the LMU-2630MB to support applications involving \u003cstrong\u003ereal-time fleet visibility, vehicle history, route monitoring, geofencing, equipment location, theft recovery, utilization analysis and event-driven telematics reporting\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eLTE Cat-M1 Cellular Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe global LMU-2630MB variant supports \u003cstrong\u003eLTE Cat-M1\u003c\/strong\u003e connectivity across a broad range of frequency bands, including \u003cstrong\u003eB1, B2, B3, B4, B5\/B26, B8, B12\/B13\/B28, B18\/B19\/B20 and B39\/B25\u003c\/strong\u003e. The device also provides \u003cstrong\u003eGSM\/GPRS 850\/900\/1800\/1900 MHz\u003c\/strong\u003e support. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eSupported communications include \u003cstrong\u003eSMS, UDP packet data and TCP\u003c\/strong\u003e, providing multiple methods for transmitting location, device status, sensor information, I\/O events and other telematics data to compatible server and cloud infrastructure. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ecellular, GPS\/GNSS and Bluetooth antennas are internal\u003c\/strong\u003e, reducing installation complexity and eliminating the need to route separate external antenna assemblies. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003ch3\u003eComprehensive 12-Wire Vehicle I\/O\u003c\/h3\u003e\n\u003cp\u003eA major feature of the sealed LMU-2630MB is its integrated \u003cstrong\u003e12-wire captive harness\u003c\/strong\u003e, which provides power and access to the device's I\/O functionality while maintaining the ruggedized design of the tracker. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThe LMU-2630MB provides \u003cstrong\u003eone fixed-bias ignition input\u003c\/strong\u003e, \u003cstrong\u003etwo configurable digital inputs\u003c\/strong\u003e, \u003cstrong\u003ethree digital outputs\u003c\/strong\u003e, and \u003cstrong\u003eone analog input\u003c\/strong\u003e. The digital inputs support selectable high- or low-bias operation over a \u003cstrong\u003e0–32 VDC range\u003c\/strong\u003e, while the three open-collector outputs are rated at \u003cstrong\u003e150 mA\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThe analog interface provides an \u003cstrong\u003eexternal ADC input supporting 0–32 VDC\u003c\/strong\u003e, allowing appropriately designed installations to monitor compatible analog signals.\u003c\/p\u003e\n\u003cp\u003eThis I\/O architecture allows the LMU-2630MB to interact with vehicle ignition circuits, switches, sensors, relays and other external equipment, providing significantly greater integration flexibility than a basic location-only GPS tracker.\u003c\/p\u003e\n\u003ch3\u003eSerial \u0026amp; 1-Wire Peripheral Integration\u003c\/h3\u003e\n\u003cp\u003eThe sealed LMU-2630MB provides \u003cstrong\u003eone TTL serial port\u003c\/strong\u003e, allowing integration with supported serial peripherals and accessories. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eA dedicated \u003cstrong\u003e1-Wire® interface\u003c\/strong\u003e is also provided for applications including \u003cstrong\u003edriver identification and temperature sensing\u003c\/strong\u003e. This enables telematics solution providers to extend the tracker with compatible identification devices or environmental sensors. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eTogether with the device's digital and analog I\/O and Bluetooth interface, these connections allow the LMU-2630MB to function as an expandable telematics endpoint rather than simply a GPS location transmitter.\u003c\/p\u003e\n\u003ch3\u003eBluetooth Low Energy 5.0\u003c\/h3\u003e\n\u003cp\u003eIntegrated \u003cstrong\u003eBluetooth Low Energy 5.0\u003c\/strong\u003e provides a short-range wireless interface for compatible peripherals, tags and sensors. CalAmp specifically positions the LMU-2630MB within a \u003cstrong\u003egateway-and-tag ecosystem\u003c\/strong\u003e, allowing purpose-built tags and sensors to be integrated for applications such as monitoring cargo location while in transit. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThe BLE antenna is internal, maintaining the sealed device's compact installation architecture.\u003c\/p\u003e\n\u003cp\u003eThis capability can be valuable in fleet and logistics applications where the installed LMU-2630MB serves as the cellular gateway while nearby BLE devices provide additional information about cargo, equipment or other monitored assets.\u003c\/p\u003e\n\u003ch3\u003eDriver Behavior \u0026amp; Motion Detection\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB incorporates a built-in \u003cstrong\u003ethree-axis accelerometer\u003c\/strong\u003e supporting \u003cstrong\u003edriver-behavior monitoring, impact detection, motion sensing and tilt detection\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eCalAmp identifies driver-monitoring applications including \u003cstrong\u003espeeding, accident detection, extreme braking and cornering\u003c\/strong\u003e. These events can be combined with GNSS position and device logic to provide fleet-management systems with contextual information about vehicle operation and significant driving events. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis combination of location and motion sensing makes the LMU-2630MB suitable for fleet-safety applications where understanding how a vehicle is being operated is as important as knowing where it is located.\u003c\/p\u003e\n\u003ch3\u003eRemote Safety Lockout \u0026amp; Vehicle Security\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB supports \u003cstrong\u003eremote safety-lockout applications\u003c\/strong\u003e, with CalAmp specifically identifying the ability to disable vehicles or equipment and remotely support theft detection and stolen-vehicle recovery. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eWhen appropriately engineered, the device's digital outputs can therefore become part of a broader fleet-security solution incorporating location, ignition state, movement detection and external vehicle-control circuitry.\u003c\/p\u003e\n\u003cp\u003eAny vehicle immobilization or remote-control functionality should be professionally designed for the specific vehicle or equipment and implemented with appropriate operational and safety controls.\u003c\/p\u003e\n\u003ch3\u003eVehicle Diagnostics Expansion\u003c\/h3\u003e\n\u003cp\u003eCalAmp specifies \u003cstrong\u003evehicle diagnostics via an accessory\u003c\/strong\u003e, allowing the LMU-2630MB platform to be expanded beyond its native location, motion and I\/O functionality when paired with the appropriate supported hardware. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis modular architecture allows fleets that require vehicle diagnostic information to incorporate that functionality while retaining the same rugged LMU-2630MB tracking platform.\u003c\/p\u003e\n\u003ch3\u003ePEG™ Edge Intelligence\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB incorporates CalAmp's \u003cstrong\u003ePEG™ edge intelligence technology\u003c\/strong\u003e, allowing device functionality to be updated and enabling applications to be developed and executed at the edge. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eEdge processing allows supported conditions and events to be evaluated directly by the telematics device rather than requiring every decision to be performed by a remote server. This architecture can support application-specific behavior based on \u003cstrong\u003evehicle location, ignition state, motion, I\/O activity and other available device information\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFor fleet applications, local processing can enable faster event recognition and more efficient communications by transmitting information according to application-specific rules rather than continuously sending unnecessary data.\u003c\/p\u003e\n\u003ch3\u003eOptional High-Capacity Internal Backup Battery\u003c\/h3\u003e\n\u003cp\u003eThe sealed LMU-2630MB can be configured with an \u003cstrong\u003eoptional lithium-ion internal backup battery with capacity up to 1000 mAh\u003c\/strong\u003e. CalAmp describes this capability as battery assurance designed to mitigate interference or primary-power loss. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThe battery's specified charging-temperature range is \u003cstrong\u003e0°C to +45°C\u003c\/strong\u003e. When equipped with the internal battery, the device is specified for operation from \u003cstrong\u003e-10°C to +60°C on battery power\u003c\/strong\u003e, compared with \u003cstrong\u003e-30°C to +60°C while connected to primary power\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis optional backup capability is particularly valuable in fleet-security and equipment-monitoring applications where continued operation following disconnection of primary power can provide additional protection and visibility.\u003c\/p\u003e\n\u003ch3\u003eLow-Power Operation\u003c\/h3\u003e\n\u003cp\u003eDespite its cellular, GNSS, BLE and I\/O capabilities, the LMU-2630MB is designed for low-power vehicle operation.\u003c\/p\u003e\n\u003cp\u003eCalAmp specifies typical consumption of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLess than 400 µA at 12 V\u003c\/strong\u003e in low-power sleep\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eLess than 4 mA at 12 V\u003c\/strong\u003e during sleep\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately \u003cstrong\u003e25 mA at 12 V\u003c\/strong\u003e during radio-active sleep\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately \u003cstrong\u003e50 mA at 12 V\u003c\/strong\u003e during GPS tracking with the cellular modem idle (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLow-power sleep operation is particularly important for commercial vehicles and equipment that may remain parked for extended periods because it helps reduce the telematics system's impact on the host battery.\u003c\/p\u003e\n\u003ch3\u003e12\/24-Volt Vehicle Electrical Architecture\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB is designed for both \u003cstrong\u003e12 V and 24 VDC vehicle electrical systems\u003c\/strong\u003e. CalAmp specifies a startup and normal operating range of \u003cstrong\u003e9–30 VDC\u003c\/strong\u003e, with momentary operation over \u003cstrong\u003e7–32 VDC\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThis broad input-voltage range makes the tracker suitable for a wide variety of passenger, commercial, fleet and equipment applications.\u003c\/p\u003e\n\u003ch3\u003eRugged IP67 Sealed Enclosure\u003c\/h3\u003e\n\u003cp\u003eOne of the defining characteristics of this LMU-2630MB configuration is its \u003cstrong\u003eIP67-rated enclosure\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eIP67 provides a substantially higher level of environmental protection than the IP41 enclosure used by the 20-pin in-cab version of the LMU-2630MB. This makes the 12-wire sealed configuration particularly attractive for installations where exposure to dust, moisture or demanding environmental conditions is a concern.\u003c\/p\u003e\n\u003cp\u003eCalAmp specifies an operating-temperature range of \u003cstrong\u003e-30°C to +60°C while connected to primary power\u003c\/strong\u003e, along with operation at up to \u003cstrong\u003e85% relative humidity at 50°C, non-condensing\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eShock and vibration specifications reference \u003cstrong\u003eU.S. Military Standards 202G and 810F and SAE J1455\u003c\/strong\u003e, while ESD performance is specified to \u003cstrong\u003eIEC 61000-4-2 with a 4 kV test level\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003ch3\u003ePhysical Design \u0026amp; Installation\u003c\/h3\u003e\n\u003cp\u003eThe sealed LMU-2630MB measures approximately \u003cstrong\u003e3.06 × 4.45 × 0.87 inches (77.8 × 113 × 22 mm)\u003c\/strong\u003e and weighs approximately \u003cstrong\u003e6.8 oz (193 g)\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003ePower and I\/O are provided through the integrated \u003cstrong\u003e12-wire captive harness\u003c\/strong\u003e, while SIM access is internal using a \u003cstrong\u003e2FF SIM\u003c\/strong\u003e. Two integrated status LEDs provide visual indication of \u003cstrong\u003eGPS\/GNSS and cellular status\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eAlthough physically larger and heavier than the 20-pin in-cab LMU-2630MB, the sealed model provides the important advantage of an IP67 enclosure and captive wiring architecture for more demanding installations.\u003c\/p\u003e\n\u003ch3\u003eCalAmp iOn \u0026amp; Telematics Cloud Integration\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB can operate as part of CalAmp's cloud and device-management ecosystem. \u003cstrong\u003eCalAmp DM-CTC\u003c\/strong\u003e provides capabilities for remotely monitoring, managing, upgrading firmware, configuring and troubleshooting deployed devices. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCalAmp Telematics Cloud\u003c\/strong\u003e can provide LMU-2630MB device data through \u003cstrong\u003eRESTful APIs\u003c\/strong\u003e, allowing telematics information to be incorporated into fleet-management systems, enterprise applications and third-party platforms. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eCalAmp notes that these cloud and software capabilities require the applicable \u003cstrong\u003esubscription service\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eCarrier \u0026amp; Regulatory Certifications\u003c\/h3\u003e\n\u003cp\u003eThe LMU-2630MB carries an extensive set of regulatory and regional certifications, including \u003cstrong\u003eFCC, IC, CE, PTCRB, Bluetooth SIG, RoHS, ASEP, ANATEL, CITC, GITEKI, INDOTEL, NBTC, NTC, RCM, SASO, SIT and VNTA\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eCalAmp also lists carrier certifications for \u003cstrong\u003eAT\u0026amp;T, Sprint and Verizon\u003c\/strong\u003e. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eThese certifications, together with broad LTE Cat-M1 band coverage, make the platform suitable for professional telematics deployments across multiple markets.\u003c\/p\u003e\n\u003ch3\u003eKey Technical Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLTE Cat-M1 cellular connectivity with broad global band support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGSM\/GPRS 850\/900\/1800\/1900 MHz support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSMS, UDP packet data and TCP communications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e55-channel hybrid GPS\/GLONASS\/SBAS GNSS engine\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWAAS, EGNOS and MSAS augmentation support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eApproximately 2.0 m CEP open-sky positioning accuracy under specified conditions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to 4 Hz location update rate\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e-167 dBm GNSS tracking sensitivity\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAssisted GPS location capability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInternal cellular, GNSS and BLE antennas\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntegrated \u003cstrong\u003e12-wire captive harness\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne fixed-bias ignition input\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo selectable high\/low-bias digital inputs, 0–32 VDC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThree 150 mA open-collector digital outputs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne external 0–32 VDC ADC analog input\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne TTL serial interface\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne 1-Wire® interface for supported driver-ID and temperature-sensing applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth Low Energy 5.0 capable\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuilt-in three-axis accelerometer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDriver-behavior, impact, motion and tilt detection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemote safety-lockout capability for appropriately configured installations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVehicle diagnostics available through compatible accessory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePEG™ edge intelligence\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOptional lithium-ion backup battery up to 1000 mAh\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTypical low-power sleep consumption below 400 µA at 12 V\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e12\/24 VDC vehicle-system compatibility\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e9–30 VDC startup and normal operating range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e7–32 VDC momentary operating range\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTwo GPS\/cellular status LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInternal 2FF SIM\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIP67-rated sealed enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e77.8 × 113 × 22 mm enclosure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWeight approximately 193 g \/ 6.8 oz\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOperating temperature from -30°C to +60°C on primary power\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFCC, IC, CE, PTCRB, BT SIG and numerous regional certifications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAT\u0026amp;T, Sprint and Verizon carrier certifications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalAmp iOn remote device-management support\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalAmp Telematics Cloud RESTful API integration (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eCalAmp LMU-2630MB 12-Wire Sealed\u003c\/strong\u003e is well suited for \u003cstrong\u003ecommercial fleet tracking, passenger and commercial vehicle telematics, service fleets, industrial equipment monitoring, smart trailers, driver-behavior monitoring, vehicle security, stolen-vehicle recovery, fleet utilization, cargo monitoring, sensor integration and enterprise IoT deployments\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIts combination of \u003cstrong\u003eLTE Cat-M1 connectivity, high-sensitivity GNSS, comprehensive vehicle I\/O, BLE 5.0, TTL serial and 1-Wire interfaces, three-axis motion sensing, PEG edge intelligence, optional 1000 mAh backup battery, captive 12-wire harness and IP67 environmental protection\u003c\/strong\u003e makes this version of the LMU-2630MB particularly well suited to installations requiring more environmental protection and integration capability than a conventional in-cab GPS tracker. (\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\" title=\"LMU-2630MB LTE CAT M1 12-Wire Sealed – CalAmp\"\u003eCalAmp\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.calamp.com\/device\/lmu-2630mb-wire\"\u003eCalAmp LMU-2630MB 12-Wire Sealed official product specifications\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eSKU DESCRIPTION: LMU2630, SEALED, BG96 GPS, LTE, CATM WW, INT BATT, LOAD DUMP, 12 WIRE-2.5M, GEN-HW\u003c\/p\u003e","brand":"CalAmp","offers":[{"title":"Default Title","offer_id":50434780070138,"sku":"LMU2630MB-SHGL12E-G1000","price":157.86,"currency_code":"USD","in_stock":true}],"url":"https:\/\/shop.dcsbusiness.com\/products\/lmu2630mb-shgl12e-g1000","provider":"DCS MARKETPLACE","version":"1.0","type":"link"}