RUTX11

Module: 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

SIM: 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation

SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD: Supports sending and reading Unstructured Supplementary Service Data messages

Black/White List: Operator black/white list

Multiple PDN: Possibility to use different PDNs for multiple network access and services

Band Management: Band lock, Used band status display

SIM Idle Protection Service: When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then.

APN: Auto APN

Bridge: Direct connection (bridge) between mobile ISP and device on LAN

Passthrough: Router assigns its mobile WAN IP address to another device on LAN

Wireless Mode: 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

Wi-Fi Security: WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

SSID/ESSID: ESSID stealth mode

Wi-Fi Users: up to 150 simultaneous connections

Wireless Connectivity Features: Wireless mesh (802.11s), fast roaming (802.11r), Relayed

Wireless MAC Filter: Whitelist, blacklist

Wireless QR Code Generator: Once scanned, a user will automatically enter your network without needing to input login information.

Hotspot: Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes

Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network Protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

VoIP Passthrough Support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection Monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall: Port forward, traffic rules, custom rules

Firewall Status Page: View all your Firewall statistics, rules, and rule counters.

Port Management: View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on.

Network Topology: Visual representation of your network, showing which devices are connected to which other devices.

Hotspot: Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customized hotspot themes

DHCP: Static and dynamic IP allocation, DHCP Relay

QoS / Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS: Supported >25 service providers, others can be configured manually

Network Backup: Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

Load Balancing: Balance Internet traffic over multiple WAN connections

SSHFS: Possibility to mount remote file system via SSH protocol

Bluetooth 4.0: Bluetooth low energy (LE) for short range communication

WAN: 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

LAN: 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack Prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN: Port and tag-based VLAN separation

Mobile Quota Control: Mobile data limit, customizable period, start time, warning limit, phone number

WEB Filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access Control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

OpenVPN: Multiple clients and a server can run simultaneously, 27 encryption methods

OpenVPN Encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

GRE: GRE tunnel, GRE tunnel over IPsec support

PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN: Method of building scalable IPsec VPNs

SSTP: SSTP client instance support

ZeroTier: ZeroTier VPN client support

WireGuard: WireGuard VPN client and server support

Tinc: Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

ID Range: Respond to one ID in range [1;255] or any

Allow Remote Access: Allow access through WAN

Custom Registers: MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

Supported Functions: 01, 02, 03, 04, 05, 06, 15, 16

Supported Data Formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Protocol: HTTP(S), MQTT, Azure MQTT, Kinesis

Data to Server: Extract parameters from multiple sources and different protocols, and send them all to a single server.

MQTT Gateway: Allows sending commands and receiving data from MODBUS Master through MQTT broker

Supported Modes: TCP Master, DNP3 Outstation

DLMS Support: DLMS – standard protocol for utility meter data exchange

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA: Firmware update from server, automatic notification

SSH: SSH (v1, v2)

SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call: Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT: MQTT Broker, MQTT publisher

SNMP: SNMP (v1, v2, v3), SNMP Trap

JSON-RPC: Management API over HTTP/HTTPS

MODBUS: MODBUS TCP status/control

RMS: Teltonika Remote Management System (RMS)

Cloud of Things: Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx: Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity: Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub: Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

CPU: Quad-core ARM Cortex A7, 717 MHz

RAM: 256 MB, DDR3

FLASH Storage: 256 MB, SPI Flash

WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA: Update FW

RMS: Update FW/configuration for multiple devices at once

Keep Settings: Update FW without losing current configuration

Operating System: RutOS (OpenWrt based Linux OS)

Supported Languages: Busybox shell, Lua, C, C++, and Python, Java in Package manager

Development Tools: SDK package with build environment provided

GPL Customization: You can now create your own custom firmware and web page application, with some examples to make the creation process easier; and brand our firmware by changing colours, logos, and so on to fit your or your clients’ needs.

GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS:

Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA: NMEA 0183

NTRIP: NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Server Software: Supported server software TAVL, RMS

Geofencing: Configurable multiple geofence zones

Data Rate: USB 2.0

Applications: Samba share, USB-to-serial

External Devices: Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter

Storage Formats: FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4

Input: 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high

Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events: Email, RMS, SMS

I/O Juggler: Allows to set certain I/O conditions to initiate event

Connector: 4-pin industrial DC power socket

Input Voltage Range:
9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
24 – 36 VDC for railway version of the code RUTX11 020G00

PoE (Passive): Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC

Power Consumption: 16 W Max

Ethernet: 4 x RJ45 ports, 10/100/1000 Mbps

I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs: 4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G Wi-Fi

SIM: 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders

Power: 1 x 4-pin power connector

Antennas: 2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS

USB: 1 x USB A port for external devices

Reset: Reboot/User default reset/Factory reset button

Other: 1 x Grounding screw

Casing Material: Aluminum housing

Dimensions (W x H x D): 115 x 44.2 x 95.1 mm

Weight: 456 g

Mounting Options: DIN rail, flat surface placement

Operating Temperature: -40 °C to 75 °C

Operating Humidity: 10% to 90% non-condensing

Ingress Protection Rating: IP30

Regulatory: CE/RED, RoHS, REACH

Vehicle: ECE R10 (E-mark)

Standards: EN 55032:2015, EN 55035:2017, Draft ETSI EN 301 489-1 V2.2.1, ETSI EN 301 489-3 V2.1.1, Draft ETSI EN 301 489-17 V3.2.0

ESD: EN 61000-4-2:2009

RS: EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT: EN 61000-4-4:2012

Surge Protection: EN 61000-4-5:2014

CS: EN 61000-4-6:2014

DIP: EN 61000-4-11:2004

Standards: ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1

Standards: IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017